Battery Protection Circuit Module (PCM) for 11.1V 3 cells in series Li-ion/Li-Polymer Battery Packs
Features and Benefits
1.Protection Circuit Board for 11.1V 3S 2A Li-ion and Li-Polymer battery pack;
2.PCM/BMS applies for 3S Li-ion and Li-Polymer battery pack;
3.With overcharge/overdischarge protection;
4.With cell balance function;
5.Compatible with Lithum ion and Li-Polymer cells.
6.How balancing function works? After battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps cells have longer service life.
Specifications
Item |
Contents |
Criteria |
|
1 |
Model |
HCX-D152 |
3S--2A working current |
2 |
Voltage |
Charging voltage |
12.6V |
3 |
Current |
Maximal continuous charging current |
2A |
Maximal continuous discharging current |
2A |
||
Current consumption |
≤50μA |
||
4 |
Overcharge Protection |
Over charge detection voltage |
4.2V~4.35V(Adjustable) |
Over charge detection delay time |
0.5S~2S |
||
Over charge release voltage |
4.0V~4.2V(Adjustable) |
||
5 |
Over Discharge Protection |
Over discharge detection voltage |
2.3V~3.0V(Adjustable) |
Over discharge detection delay time |
50~200mS |
||
Over discharge release voltage |
2.3V~3.0V(Adjustable) |
||
6 |
Over Current Protection |
Over current detection voltage |
0.1V~0.2V(Adjustable) |
Over current detection current |
Adjustable |
||
Detection delay time |
5~20mS |
||
Release condition |
Cut load,automatically recover |
||
7 |
Short Circuit Protection |
Detection condition |
Exterior shot circuit |
Detection delay time |
200~500uS |
||
Release condition |
Cut load,automatically recover |
||
8 |
Balance/Equilibrium |
Balance voltage for single cell |
4.20±0.025V |
Balance current for single cell |
42±5mA |
||
9 |
Resistance |
Inner resistance |
≤30mΩ |
10 |
Temperature |
Operating temperature range |
0~+85°C |
Storage temperature range |
0~+85°C |
||
11 |
Size (L*W*T) |
L33mm*W15mm*T6mm |