Protection Circuit Module(PCB) for 9.6V 3S LiFePO4 battery pack
Features and Benefits
1.Protection Circuit Board for9.6V 3S LiFePO4 battery pack;
2.PCB applies for 3 cells LiFePO4 battery pack;
3.To prevent the battery packs from overcharge only ;
4.Maximal working current 4A
5.Compatible with all the LiFePO4 cells.
Specifications
Item |
Contents |
Criteria |
|
1 |
Model |
HCX-D232 |
3S-NO working current |
2 |
Voltage |
Charging voltage |
10.8V |
3 |
Current |
Maximal continuous charging current |
4A |
Maximal continuous discharging current |
NO |
||
Current consumption |
≤20μA |
||
4 |
Overcharge Protection |
Over charge detection voltage |
3.6V~3.9V(Adjustable) |
Over charge detection delay time |
0.5S~2S |
||
Over charge release voltage |
3.5V~3.8V(Adjustable) |
||
5 |
Over Discharge Protection |
Over discharge detection voltage |
/ |
Over discharge detection delay time |
/ |
||
Over discharge release voltage |
/ |
||
6 |
Over Current Protection |
Over current detection voltage |
/ |
Over current detection current |
/ |
||
Detection delay time |
/ |
||
Release condition |
/ |
||
7 |
Short Circuit Protection |
Detection condition |
/ |
Detection delay time |
/ |
||
Release condition |
/ |
||
8 |
Balance/Equilibrium |
Balance voltage for single cell |
/ |
Balance current for single cell |
/ |
||
9 |
Resistance |
Inner resistance |
≤20mΩ |
10 |
Temperature |
Operating temperature range |
-40~+85°C |
Storage temperature range |
-20~+125°C |
||
11 |
Size (L*W*T) |
L150mm*W12mm*T6mm |